Made in EU

Särmä TST L3 Wind Anorak

Made in EU

7 reviews

$108.00 USD

Shipping calculated at checkout.

Color: M05 Winter Camo

Size: 2X-Large 46" - 49"

Small Medium Large X-Large 2X-Large

Product variants

A few left in stock – 90% of orders are shipped during the next business day. – Place an order before the product is out of stock. – Subscribe to a Back in stock notification.

Measurements

Size info

This garment is very loose to fit easily over everything else; not just the clothes but your plate carrier, pouches and all that jazz.

Sizes Small to Large pack neatly into the General Purpose Pouch Zip S and sizes X-Large to 3X-Large fit better into the General Purpose Pouch Zip M. These are reasonable suggestions: sure, an X-Large Wind Anorak could be folded and tucked into an S-size pouch if you're careful, but would you want to count on it in the field? Similarly, you can opt for the M-size pouch even if you have a Large jacket.

For a "normal jacket" fit, choose at least 1-2 sizes smaller than you normally would. One notch shorter is a good idea, too. Someone who normally wears X-Large Long can use this jacket in size Small Regular over a hoodie with ease!

The size system has been updated: The new anoraks have a tighter fit. The Small size is almost the same as before, but the larger sizes are smaller. A rule of thumb: Regarding the larger sizes, pick one larger size than before. E.g. if a Large-sized anorak was perfect for your setup, now you should go X-Large.

Garment measurements

Metric

Size | Chest Width | Center Back Length

Small | 64 cm | 86 cm

Medium | 68 cm | 88 cm

Large | 72 cm | 90 cm

X-Large | 76 cm | 92 cm

2X-Large | 80 cm | 94 cm

Imperial

Size | Chest Width | Center Back Length

Small | 25.2" | 33.9"

Medium | 26.8" | 34.6"

Large | 28.3" | 35.4"

X-Large | 29.9" | 36.2"

2X-Large | 31.5" | 37"

Technical details and instructions

Materials

Fabric: 100% Polyamide Ripstop, 70g/m2, 70D, non-fluorinated water-repellent finish. Zippers are from Kroko – they also make zippers for e.g. the Savotta Keikka duffel bags.

MultiCam

Fabric: Balloon FR MultiCam 100% Polyamide, 105g/m2, 70D. The fabric has Brookwood FR-Tex® and DWR treatments – the fabric has certain flame-retardant properties, but the garment itself has no official FR standard.

Description

The expression "worth its weight in gold" comes to mind when you need the Wind Anorak and have it with you, but it's inaccurate because the jacket weighs so little. At any rate, simply pull the anorak out of a small pouch and you'll quickly raise a shield against the misty autumn wind, without forgetting concealment.

A protective windproof and water-resistant shell
Quick to don over everything else
Remarkably light and packable

Minimalistic and functional

The details of the Särmä TST Wind Anorak are only there where your body parts poke out: a two-way adjustable hood with a lid, hook-and-loop tabs on the cuffs and an adjustable elastic hem with mounting points for a crotch strap (optional, DIY). The hood is large enough to fit over a helmet and thanks to the zippered collar, you don't need to doff your helmet to put the Wind Anorak on.

L3 - Insulation layer

The third layer of the Varusteleka clothing system, designed to be worn over a base layer of merino wool and under a field uniform or other outer shell. L3 garments come in two styles, unlined wind wear and lofty thermal wear with Climashield insulation. Lightweight, quick-drying, and highly breathable fabrics guarantee effective moisture management and great packability.

Take a look at our Varusteleka Clothing System!

Manufactured in the EU

These are sewn in Estonia by an experienced factory with a long history of producing clothing for military, law enforcement, and emergency services. The new versions are made in Poland.

Search

Commonly searched

Särmä TST L3 Wind Anorak