TriggerTech AR-15 Duty Trigger

76.000 Ft

Tax included. Shipping calculated at checkout.

Out of stock – 90% of orders are shipped during the next business day.

Technical details and instructions

Compatible with AR15 rifles
Straight trigger bow
Single-stage trigger
Trigger pull weight: 1.6 kg / 3.5 lbs
Zero creep
Overtravel (trigger movement after the shot): 1.5 mm / 0.060"
Reset (trigger movement back to ready position): 1.8 mm / 0.070"

Note: Listed values are manufacturer estimates.

Installation Instructions

If you’re unsure about installing the trigger assembly yourself, ask an experienced enthusiast for help or take it to a professional gunsmith. If you’re confident in your skills, you can usually replace the trigger assembly yourself by following these steps – at your own risk.

Ensure the firearm is unloaded and safe to handle before starting the installation.
Remove the original trigger: detach the lower receiver and remove the original assembly per the manufacturer’s instructions (removing two pins). Keep in mind that a basic two-part trigger assembly is held under spring tension – remove it carefully. You may also need to remove the safety mechanism temporarily. Make sure all small pins and springs are accounted for.
Install the trigger assembly into the lower receiver, ensuring all holes are properly aligned with the holes in the lower receiver.
Reinsert the pins.
Verify that the trigger functions properly before reassembling the firearm. Avoid pulling the trigger when the lower receiver is detached from the firearm.
Reassemble the rifle and test the trigger pull to ensure proper installation. Perform a drop test to confirm the firearm does not discharge when jarred, whether the safety is engaged or not.

Description

Does it seem like there’s sand in your partner’s trigger mechanism? You keep pulling and pulling, but nothing happens, and the pull itself is rough and heavy? Sounds like your AR has the original so-called mil-spec trigger mechanism – toss it out and drop in this excellent value-for-money drop-in trigger from TriggerTech!

Single-stage trigger
Zero creep
Straight trigger bow
Crisp break and short reset for rapid follow-up shots

The TriggerTech Duty Trigger is a non-adjustable, single-stage trigger that allows for quick shots and reliable performance. With a pull weight of 1.6 kg / 3.5 lbs, it’s not a featherlight benchrest match trigger, but a dependable unit built for rugged use.

Important Notes

The trigger assembly is designed for standard AR15/M4 carbines. It is not compatible with Sig MPX/MCX firearms, HKs, pistol-caliber carbine variants of AR15/M4 rifles, or other weapon systems with proprietary triggers.