The Arisaka Aimpoint Mount Mk2 series is a precision-machined mounting solution for Aimpoint red dot optics. Built from 7075-T651 aluminum and finished with MIL-A-8625 Type III hard coat black anodizing, these mounts are made in the USA and designed for hard professional use.

Features

Mounts are available in 1.54" (39.1 mm), 1.93" (49.0 mm), and 2.26" (57.4 mm) heights. The 1.54" height provides lower 1/3 co-witness with standard AR-height iron sights. The 2.26" height aligns with the Unity FAST FTC Magnifier Mount. The 1.93" and 2.26" versions include an integrated accessory interface compatible with upcoming Arisaka accessories such as the Extendo mounting platform.

All mounts are 1.98" (50.3 mm) long and attach to standard Picatinny rails. Each mount includes the required mounting hardware.

Acro Mount Mk2

Designed for the Aimpoint Acro P1 and P2, and compatible with other optics using the Acro footprint such as the Steiner MPS.

• Compatible optics: Aimpoint Acro P1/P2, Steiner MPS (Acro footprint)
• Weight (incl. screws): 1.54" – 2.5 oz (71 g) / 1.93" – 2.7 oz (77 g) / 2.26" – 2.8 oz (79 g)
• Optic to mount torque: 25 in-lb (2.8 Nm)
• Mount to Picatinny rail torque: 50 in-lb (5.7 Nm)
• Tools required: T10 Torx (optic), T27 or IP27 Torx (mount)
• Hardware: One 10-32x1.25" Torx socket cap screw

With the 2.26" version, AR-height iron sights are visible through the window underneath the optic.

Micro Mount Mk2

Designed for Aimpoint Micro T1/T2 optics and compatible with optics sharing the Micro footprint.

• Compatible optics: Aimpoint Micro T1/T2, H1/H2, Comp M5/M5S, Sig Romeo 4/5, Vortex Crossfire, Holosun HS503/515/530
• Weight (incl. screws): 1.54" – 2.3 oz (65 g) / 1.93" – 2.5 oz (71 g) / 2.26" – 2.6 oz (74 g)
• Optic to mount torque: 11.9 in-lb (1.35 Nm)
• Mount to Picatinny rail torque: 50 in-lb (5.7 Nm)
• Hardware: One 10-32x1.25" Torx socket cap screw, four M3x4mm Torx button head cap screws

Height note: The Aimpoint Comp M5S and Duty are 10 mm (0.393") taller than the Comp M5 and Micro T2.

Interface note: The Micro mounting interface wedges the optic into place using angled contact surfaces. A small gap between the optic and horizontal surfaces of the mount is normal and does not affect zero retention.