lowa_innox_pro_gtx_mid_tf-065fd932d48275.jpg
lowa_innox_pro_gtx_mid_tf-065fd932d48275.jpg
lowa_innox_pro_gtx_mid_tf-065fd9328cff70.jpg
lowa_innox_pro_gtx_mid_tf-065fd8b17bd361.jpg
lowa_innox_pro_gtx_mid_tf-065fd8b1452484.jpg
lowa_innox_pro_gtx_mid_tf-065fd8b1eb0120.jpg

Lowa

Lowa Innox Pro GTX Mid TF

1.035,00 lei RON
1.035,00 lei RON
Tax included. Shipping calculated at checkout.

Extremely lightweight, mid-height tactiblack military boots with a Gore-Tex membrane. No matter whether you are a member of an elite military unit or just looking for comfortable and waterproof footwear for your outdoor activities, these will do the job. Read full description
  • A few left in stock! – 90% of orders are shipped during the next business day.
Measurements

Made to UK sizes. The EU/French size is converted to larger numbers than usual. If you buy shoes based on sizes like 42, 45, or such,pick at least half a size largerthan you normally would. if your foot is very wide or you want a lot of sock clearance for winter use, consider even a larger size.

Technical details and instructions

Materials

Upper: 70% synthetic, 30% fabric

The synthetic fabrics are made from nylon, polyester, polypropylene, and elastane (Lycra). They give the upper abrasion resistance and tear strength. Natural and synthetic fabrics facilitate optimal warming and moisture management. They are smooth and make the boots very comfortable.

Midsole: 100% polyurethane

Polyurethane (PU) is a soft plastic that has very good cushioning properties. It makes the midsole lightweight and flexible.

Insole: 50% Memolatex, 45% felt, 5% fabric

Memolatex is made from very soft and lightweight latex foam that is very comfortable and supports the natural rolling motion of the foot. Felt is characterized by its high elasticity and its insulating qualities. Natural and synthetic fabrics facilitate optimal warming and moisture management, and make the insole comfortable.

Lining: 100% Gore-Tex

Boots equipped with a GTX extended comfort footwear membrane are waterproof and particularly suited for warm weather thanks to their high breathability.

Gore-Tex Boot care

We recommend reading ourshoe and bootcare article. You should not use regular shoe polish for gore-tex boots and shoes, instead use the stuff specifically designed for them. Regular grease/polish can block the holes in the membrane, after which they won't breathe anymore.

Description

Extremely lightweight, mid-height tactiblack military boots with a Gore-Tex membrane. No matter whether you are a member of an elite military unit or just looking for comfortable and waterproof footwear for your outdoor activities, these will do the job.

  • Black mid-height military boot with a Gore-Tex membrane
  • Upper: Synthetic and fabric
  • Slip lasted, injected sole
  • Last width: normal
  • Lacing: Closed hooks and fabric loops
  • Weight: c. 470 g (1.04 lbs) per shoe (UK 8/EU 42)
  • Made in Slovakia

Features

Waterproof and breathable Gore-Tex membrane

No matter what you plan on doing, Gore-Tex will keep your feet dry. Designed with optimal breathability in mind, these GTX boots are a pleasure to wear even during intense activities and warm weather. Moisture produced inside the shoe escapes through the pores in the membrane.

Lowa Multi Trac® outsole

These boots have the Lowa Multi Trac® rubber outsoles made from an optimized rubber compound that gives you good traction in off-trail use. The triangular profile design is suited for multifunctional outdoor uses on moderate terrain. For steep mountains, you might want a stiffer pair. The sole provides pleasant rolling properties, helping to prevent fatigue.

LOWA DynaPU® midsole

The midsole is the leading contributor to the footwear’s rolling and cushioning properties, especially during long hikes. In these boots, this midsole is made from very lightweight LOWA DynaPU foam padding, which retains its cushioning properties for a long time. The midsole provides stability and comfort thanks to the three-dimensional, slightly elevated Lowa Monowrap® PU frame. This special midsole design ensures snug footing and supports your feet on uneven surfaces.

Injected construction

The sole is bonded to the slip-lasted upper in an injection process. The upper is placed into a specially designed mold, and various layers of very lightweight PU foam padding are poured into it. This method creates very lightweight boots that offer optimal cushioning. The layers include carefully coordinated degrees of rigidity to create the best possible comfort.

Closed lacing hooks

These boots come with closed lacing hooks that guide the laces securely and minimize the risk of the shoe getting caught on objects.