Quarter flaps for the SCARAB LT plate carrier – attach this to your plate carrier, so you don’t have to move or remove gear from the front when donning and doffing the carrier. This Quarter Flap also takes a 6" x 6" armor plate. The Quarter Flaps come in two camo patterns – the Finnish M05 is a very limited edition and only available from Varusteleka!

This is a collaboration with Velocity Systems: We put the specs, materials, and a wad of cash on the table – they sent us Made in the USA gear in the best ever woodland camo pattern, the Finnish M05! This is a limited edition, and only available from Varusteleka. Check out the whole Velocity Systems M05 selection!

Features

The SCARAB LT/LE Quarter Flaps attach to the SCARAB LT plate carrier front plate bag sides with One-Wrap fingers. The Quarter Flaps have a front flap opening under which the shorter SCARAB cummerbund attaches (sold separately). Using the Quarter Flaps you can don and doff the plate carrier without moving or removing gear from the front, as the cummerbund will open from your flank. You can also attach these Quarter Flaps to any plate carrier with a hook and loop based front flap. The Quarter Flaps can also be used just as side armor plate bags by running the normal length cummerbund through the Quarter Flap.

Compatibility with Särmä TST PC18 and LVPC: these plate carriers do not have the SCARAB buckles, but you can use One-Wrap or a PALS cummerbund to carry the Flaps.

• 3 x 3 PALS webbing on the outside
• Size 6.5" x 6.5" / 165 mm x 165 mm
• Pouch for a 6" x 6" / 150 x 150 mm armor plate
• Made in the USA