Savotta 2-Mag Pouch, AR10

A pouch for two 20rd AR10 magazines with a protective lid – the lid is secured shut with a tuck tab and/or hook & loop. The pouch has circumferential bungee cord retention, which means the magazines won’t be bouncing around and making noise while you move. This magazine pouch also features a PALS and belt compatible attachment system.

Durable Savotta pouches with great features and attachment options now available!

Features

When you need to carry magazines in conditions other than dry indoors, you might want to consider mag pouches with flap closure. A flap or lid will stop mud, snow, and dirt from getting in your mags and consequently in your weapon system. Generally speaking you should avoid e.g. chambering muddy or sandy rounds in your weapon.

This mag pouch will take two AR10 rifle 20rd mags – designed for two Magpul AR10 20rd PMAGs. The pouch also features:

• Protective lid w/ a tuck tab and hook & loop closure
  • Integrated hook & loop "deactivation flap"
• Bungee cord for circumference and retention adjustments
• Reinforced bottom part – this usually gets the most punishment
• MOLLE/PALS and belt attachment (45-50 mm / 1.8"-2.0" belts)
• Drainage grommet

Instead of two AR10 rifle mags this pouch can take e.g. one HK417/MR308 mag (it is that much beefier) or some other suitable-sized item.

Tuck tab system

The lid is closed using a polyethylene reinforced tuck tab and hook & loop. A tuck tab is mechanically very simple, but extremely reliable compared to plastic buckles, press studs or just using hook & loop. This system is almost identical to how the attachment straps are locked into place on Savotta PALS attachable pouches, just shorter and with a grip tab for rapid opening.

The hook & loop allows the pouch to stay securely closed even when half empty, and to be quickly closed without using the tuck tab. The hook panel can be covered with an integrated deactivation loop flap for silent operation.

Note: You might want to bend the tuck tab of a brand new pouch to a banana shape – it will work a lot more smoothly this way. Don’t worry, the polyethylene will not break when bent this way.