savotta-valjas-slim-belt-pad-068907fcd5b714.jpg
savotta-valjas-slim-belt-pad-068907fcd5b714.jpg
savotta-valjas-slim-belt-pad-068908dbf0e92c.jpg
savotta-valjas-slim-belt-pad-0689074c42eeb7.jpg
savotta-valjas-slim-belt-pad-0689074a6b4ca8.webp
savotta-valjas-slim-belt-pad-0689074785592a.webp
savotta-valjas-slim-belt-pad-068907490aeba0.webp
savotta-valjas-slim-belt-pad-068907fbe89353.jpg
savotta-valjas-slim-belt-pad-068907fc375955.jpg
savotta-valjas-slim-belt-pad-068907fc888d1d.jpg

Savotta

Savotta Valjas Slim Belt Pad

$47.99 CAD
$47.99 CAD
Shipping calculated at checkout.

A slim belt pad for common 45-50 mm (1.75"-2") wide belts. Low-profile and padded enough to comfortably carry relatively light loads. It has a friction lining to prevent unwanted sliding around. Read full description
  • A few left in stock! – 90% of orders are shipped during the next business day.
Measurements

The "S-M", "M-L" and "L-XL" sizing should be considered a rough guideline! The S-M pad is 70 cm (27.5") long, the M-L pad is 80 cm (31.5") long and the L-XL pad is 95 cm (37.5") long. They work best with a 15-30 cm (6-12") gap between the pad ends at the front.

To find your size

  1. Get dressed as you would be when using your padded belt, pant belt and all.
  2. Measure your circumference at the height where you want to wear your padded belt, which is most commonly just above your hips.
  3. If the measurement is 100 cm (40"), an S-M pad would leave a full 30 cm (12") gap at the front, while an M-L would leave a 20 cm (8") gap. In this case, we recommend going with the M-L.
Technical details and instructions

Weight

  • S-M: 140 g (4.9 oz)
  • M-L: 160 g (5.6 oz)
  • L-XL: 190 g (6.7 oz)

Dimensions (L x W)

  • S-M: 70 x 8.5 cm (27,5")
  • M-L: 80 x 8.5 cm (31,5")
  • L-XL: 95 x 8.5 cm (37,5") 

Materials

  • Main fabric: 500D Cordura (100% polyamide)  
  • Webbing: 100% polyester (Multicam 100% polyamide)

Description

A slim belt pad for common 45-50 mm (1.75"-2") wide belts. Low-profile and padded enough to comfortably carry relatively light loads. It has a friction lining to prevent unwanted sliding around.

  • Two layers of dense 4 mm (0.16") cell foam padding
  • Body-side rubberized friction fabric
  • Flat 60 mm (2.4") wide belt loops with 25 mm (1") spacing
  • Belt loops also enable the horizontal attachment of PALS pouches
  • Three size options available: (S-M, M-L, L-XL)
  • All color options offer good NIR performance
  • 5-year material and workmanship warranty
  • Made in Finland/Estonia

This is as simple as a belt pad can be, and it works with pretty much any belt that fits through the loops. The flat belt loops, made from a 25 mm (1") webbing, are 60 mm (2.4") wide. Since the loops have a 25 mm (1") spacing, they can also be used to attach PALS-compatible pouches horizontally.

The padding consists of two layers of 4 mm (0.16") thick dense closed-cell foam. The body side is made from a rubberized friction fabric, which keeps the padded belt from sliding up and down and all around.

If you’re looking to carry a heavier belt kit, check out the 3-piece belt pad of the Savotta Valjas belt system. The larger, wider pads allow for more carrying comfort and feature dedicated harness attachment D-rings.