{"title":"Reptilia","description":null,"products":[{"product_id":"reptilia-rof-45-mount-30-mm","title":"Reptilia ROF-45 Mount, 30 mm","description":"\u003cp\u003eYou like it tilted? This is the best way to mount a red dot sight on your Reptilia AUS Mount at 45 degrees! This mount is compatible with Trijicon RMR, SRO, and other optics that use the same footprint – check the list for examples. This mounting piece also fits the Geissele Super Precision scope mount.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSimple and solid construction\u003c\/li\u003e\n\u003cli\u003eLow profile and sight line close to scope\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eThis is compatible with \u003ca href=\"\/en\/product\/reptilia-aus-mount-30-mm\/78895\"\u003e30mm Reptilia AUS\u003c\/a\u003e and Geissele Super Precision mounts, replacing the top cap of the forward scope ring.\u003c\/b\u003e Available in two colors: black and FDE.\u003c\/p\u003e\u003ch2\u003eWhy a Secondary Sight?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn tactical real-world situations as well as sport shooting and hunting, you may need to shoot accurately both at a distance and quickly at close range – for this purpose, a quick-use red dot sight is installed on the firearm in addition to a magnifying optic\u003c\/li\u003e\n\u003cli\u003eA secondary sight allows you to keep a low-power variable optic (LPVO) pre-set to a higher magnification, speeding up transitions between close and distant targets\u003c\/li\u003e\n\u003cli\u003eAnother use is, for example, to zero subsonic .300BLK rounds for the red dot and supersonic rounds for the magnifying optic (or vice versa)\u003c\/li\u003e\n\u003cli\u003eSnipers and designated marksmen often have a secondary sight alongside a larger optic, especially in semi-automatic rifles\u003c\/li\u003e\n\u003cli\u003eA red dot sight or such will also enable you to aim with your scoped rifle while using NVGs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cp\u003eSome prefer to keep the secondary sight on the side of the weapon, tilting the rifle to bring the sight picture into view – others prefer to mount the sight at twelve o'clock, aiming over the magnifying optic without tilting the rifle. This mount represents the former style.\u003c\/p\u003e\u003cp\u003eThe Reptilia ROF-45 replaces the forward top ring cap on your AUS\/Geissele mount. It uses the existing screws of the optic mount's forward scope ring (T15 Torx). The ROF-45 is machined from a single piece of 7075-T6 aluminum and is finished with MIL-STD Type III Class 2 hard anodizing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMachined from 7075-T6 aluminum\u003c\/li\u003e\n\u003cli\u003eMIL-STD Type III Class 2 hardcoat anodized\u003c\/li\u003e\n\u003cli\u003eWeighs 28 g \/ 1.0 oz. (replaces the top ring cap of the scope mount)\u003c\/li\u003e\n\u003cli\u003eCompatible with 30mm Reptilia AUS and Geissele Super Precision optic mounts\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf you prefer your secondary sight to be mounted at 12 o’clock position, check out the \u003ca href=\"\/en\/product\/reptilia-rof-90-mount-30-mm\/78898\"\u003eReptilia ROF-90\u003c\/a\u003e (for Aimpoint Micro footprint).\u003c\/p\u003e\u003cp\u003eLike all Reptilia products, the ROF mounts are made in the USA and come with a lifetime warranty against workmanship and material defects.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis ROF-45 mount is compatible with at least these optics:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTrijicon: RMR, SRO\u003c\/li\u003e\n\u003cli\u003eHolosun: HS407, HE407, HS507, HE507, HE508\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIncluded in the Package\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eROF-45 mount\u003c\/li\u003e\n\u003cli\u003eTwo T10 Torx screws for mounting the red dot sight\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRecommended Torque Specs\u003c\/h2\u003e\u003cp\u003eWhat's torque, you ask? In firearm installations, it's advisable to follow the torque values provided by the manufacturers – that is, how tight the screws should be fastened. So, get a torque wrench with a range of about 0-70 in-lbs \/ 0-8 Nm! The scope ring screws are fastened to the same torque as without the ROF, 15 in-lbs \/ 1.7 Nm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e Your red dot sight is attached to the ROF with screws provided with the mount, according to the torque specs of your sight – so check the specs from your sight's manual or the manufacturer. Typically, the torque is around 12 in-lbs \/ 1.4 Nm (Aimpoint Micro), so the force needed is quite minimal. If you overdo it, you might damage something and have a bad time.\u003c\/p\u003e\u003ch2\u003eInstallation Instructions\u003c\/h2\u003e\u003cp\u003eHere's an installation video. Below are step-by-step written instructions.\u003c\/p\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/LwgfJCv4eQs?si=qvMmTxMUEFFBM6V0\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\u003ch3 class=\"expand_button\"\u003eTools Required\u003c\/h3\u003e\u003cdiv class=\"expand_container\"\u003e\u003cul\u003e\n\u003cli\u003eT15 Torx tool\u003c\/li\u003e\n\u003cli\u003eT10 Torx tool\u003c\/li\u003e\n\u003cli\u003eThe included T10 Torx screws\u003c\/li\u003e\n\u003cli\u003eRecommended: a torque wrench for small torques (e.g., 0-70 lbs-in \/ 0-8 Nm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003ch3 class=\"expand_button\"\u003eAttaching ROF-45 to AUS Mount\u003c\/h3\u003e\u003cdiv class=\"expand_container\"\u003e\u003cul\u003e\n\u003cli\u003eYou'll need a T15 Torx tool and a torque wrench for this step\u003cul\u003e\u003cli\u003ePerform all steps somewhere other than above a drain, a full trash can, or similar (we have been there)\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eRemove the forward top ring cap of the AUS Mount and put it somewhere for safekeeping – keep the screws handy, as you'll need them shortly\u003c\/li\u003e\n\u003cli\u003ePlace the ROF-45 (without the sight) onto the forward scope ring\u003c\/li\u003e\n\u003cli\u003eLightly tighten the screws of the scope ring in an X-pattern (e.g., front left, rear right, rear left, front right)\u003c\/li\u003e\n\u003cli\u003eFinally, tighten the screws to the specified torque in the same X-pattern (15 in-lbs \/ 1.7 Nm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003ch3 class=\"expand_button\"\u003eInstalling Red Dot Sight on ROF-45 Mount\u003c\/h3\u003e\u003cdiv class=\"expand_container\"\u003e\u003cul\u003e\n\u003cli\u003eYou'll need the included T10 Torx screws, a T10 Torx tool, and a torque wrench for this step\u003c\/li\u003e\n\u003cli\u003eMount the sight correctly onto the ROF-45 to the manufacturer's specified torque\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e","brand":"Reptilia","offers":[{"title":"Black","offer_id":51826208473427,"sku":"78531","price":124.99,"currency_code":"EUR","in_stock":true},{"title":"Brown","offer_id":51826208506195,"sku":"78532","price":124.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/1952\/9555\/files\/reptilia_rof_45_mount_30_mm-065fd760392036.jpg?v=1757261590"},{"product_id":"reptilia-dot-mount-aimpoint-micro","title":"Reptilia DOT Mount, Aimpoint Micro","description":"\u003cp\u003eHere is a very simple and sturdy mount for your red dot sight! This Reptilia DOT Mount is compatible with Aimpoint Micros and other optics that use the same footprint – check the list for examples.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVery light\u003c\/li\u003e\n\u003cli\u003eSturdy construction\u003c\/li\u003e\n\u003cli\u003e1.93\" sight height\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eThis mount is compatible with Aimpoint Micros and other optics with the same footprint.\u003c\/b\u003e The sight height is 49 mm \/ 1.93\" from the top of the rail, which makes this suitable for operating a rifle while wearing a gas mask and\/or NVGs. It comes in two colors: black and FDE.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cp\u003eThe Reptilia DOT Mount attaches to the Picatinny rail with a spring-loaded steel clamp. You can tighten the screw with either a T25 Torx tool or a flat blade screwdriver (we recommend a Torx tool) – remember to press the mount \u003cb\u003edownward and forward\u003c\/b\u003e while tightening to keep it firmly in place despite recoil. The mount is machined from a single piece of 7075-T6 aluminum and finished with MIL-STD Type III Class 2 hard anodized coating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSight height 49 mm \/ 1.93\"\u003c\/li\u003e\n\u003cli\u003eMachined from 7075-T6 aluminum\u003c\/li\u003e\n\u003cli\u003eMIL-STD Type III Class 2 hardcoat anodized\u003c\/li\u003e\n\u003cli\u003eWeighs 55 g \/ 1.94 oz.\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLike all Reptilia products, the DOT Mount is made in the USA and comes with a lifetime warranty against defects in workmanship or material.\u003c\/p\u003e","brand":"Reptilia","offers":[{"title":"Black \/ Black, Height 49 mm \/ 1.93\"","offer_id":51826209456467,"sku":"78534","price":126.99,"currency_code":"EUR","in_stock":false},{"title":"Brown \/ FDE, Height 49 mm \/ 1.93\"","offer_id":51826209489235,"sku":"78535","price":126.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/1952\/9555\/files\/reptilia_dot_mount_aimpoint_t_1t_2-065fd7836126a0.jpg?v=1757261599"},{"product_id":"reptilia-aus-mount-30-mm","title":"Reptilia AUS Mount, 30 mm","description":"\u003cp\u003eHere is a top-tier single-piece cantilever scope mount for your rifle! The Reptilia AUS Mount is especially suited for AR-type rifles, where the mount attaches to the upper receiver's fixed Picatinny rail – cantilevered forward to allow for your eye relief preference.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVery light\u003c\/li\u003e\n\u003cli\u003eSturdy construction\u003c\/li\u003e\n\u003cli\u003eCompatible with accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eThis mount fits a 30-millimeter scope tube.\u003c\/b\u003e There are two scope sight heights to accommodate your preference: 39 mm \/ 1.54\" and 43 mm \/ 1.7\" from the center of the bore. It comes in two colors: black and FDE.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cp\u003eThe Reptilia AUS Mount attaches to the Picatinny rail with spring-loaded steel clamps. You can tighten the screws with either a T25 Torx tool or a flat blade screwdriver (we recommend a Torx tool) – remember to press the mount \u003cb\u003edownward and forward\u003c\/b\u003e while tightening to keep it firmly in place despite recoil. The scope rings have T15 Torx screws. The mount is machined from a single piece of 7075-T6 aluminum and finished with MIL-STD Type III Class 2 hard anodized coating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMachined from 7075-T6 aluminum\u003c\/li\u003e\n\u003cli\u003eMIL-STD Type III Class 2 hardcoat anodized\u003c\/li\u003e\n\u003cli\u003eWeighs 158 g \/ 5.2 oz.\u003c\/li\u003e\n\u003cli\u003eFits scopes with a 30 mm tube\u003c\/li\u003e\n\u003cli\u003eTwo scope sight heights\u003c\/li\u003e\n\u003cli\u003eFits scopes with up to 77 mm objective over a flat-top Picatinny rail\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf you need an auxiliary red dot sight on your scope mount, the Reptilia AUS Mount is compatible with all 30-millimeter Reptilia ROF mounts, such as the ROF-90 and ROF-45.\u003c\/p\u003e\u003cp\u003eLike all Reptilia products, the AUS Mount is made in the USA and comes with a lifetime warranty against defects in workmanship or material.\u003c\/p\u003e\u003ch2\u003eRecommended Torque Specs\u003c\/h2\u003e\u003cp\u003eWhat's torque, you ask? In firearm installations, it's advisable to follow the torque values provided by the manufacturers – that is, how tight the screws should be fastened. So, get yourself a torque wrench with a range of about 0-70 in-lbs \/ 0-8 Nm! \u003cb\u003eAs engraved on the scope mount\u003c\/b\u003e, tighten the mounting clamp screws to 45 in-lbs \/ 5.1 Nm and the scope ring screws to 15 in-lbs \/ 1.7 Nm.\u003c\/p\u003e\u003cdiv class=\"expand_container\"\u003e\u003cul\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"Reptilia","offers":[{"title":"Black \/ Black, Height 43 mm \/ 1.7\"","offer_id":51826210996563,"sku":"78521","price":369.99,"currency_code":"EUR","in_stock":false},{"title":"Brown \/ FDE, Height 43 mm \/ 1.7\"","offer_id":51826211029331,"sku":"78522","price":369.99,"currency_code":"EUR","in_stock":false},{"title":"Black \/ Black, Height 39 mm \/ 1.54\"","offer_id":51826211062099,"sku":"78525","price":369.99,"currency_code":"EUR","in_stock":false},{"title":"Brown \/ FDE, Height 39 mm \/ 1.54\"","offer_id":51826211094867,"sku":"78526","price":369.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/1952\/9555\/files\/reptilia_aus_mount_30_mm-065fd6a3c6827e.jpg?v=1757261604"},{"product_id":"reptilia-recc-e-carbine-stock-ar-15","title":"Reptilia RECC·E Carbine Stock, AR-15","description":"\u003cp\u003eSuper lightweight collapsible stock for AR-15\/M4 rifles – includes a proprietary buffer tube with no castle nut required for this system. Available in black and FDE colors.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExtremely lightweight\u003c\/li\u003e\n\u003cli\u003eAdjustable length\u003c\/li\u003e\n\u003cli\u003eIncludes buffer tube\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInformation\u003c\/h2\u003e\u003cp\u003eThis collapsible stock was designed to meet the needs of a military end user: the ultralight stock features a constant cheek weld, attachment points for ambidextrous QD sling sockets, a rubber butt pad, and its own proprietary buffer tube without the need for a castle nut. Buffer and spring are not included.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBuffer tube made of 7075-T6 aluminum, Type III Mil-Spec hardcoat anodized\u003c\/li\u003e\n\u003cli\u003ePlastic components are Impact Modified Glass-Filled Nylon Polymer\u003c\/li\u003e\n\u003cli\u003eNitrided alloy steel hardware\u003c\/li\u003e\n\u003cli\u003eWeight only 12 oz. \/ 340 g – including buffer tube\u003c\/li\u003e\n\u003cli\u003eLength of pull 10.8\" - 14.2\" \/ 27 - 36 cm\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Instructions and Video\u003c\/h2\u003e\u003cp\u003eSee the video for instructions. You'll need at least a wrench for installation – preferably a torque wrench with suitable sockets. The sockets appear to be inch-sized 5\/8\" and 13\/16\" – so metric sockets 16mm and 21mm might also work. In the video, the person talks about \"inch-pounds,\" but the actual torque values are in \"foot-pounds\" (ft-lbs), as indicated on the stock attachment parts. Tighten the buffer tube to 35 ft-lbs \/ about 47 Nm of torque, and the rear screw to 25 ft-lbs \/ about 34 Nm.\u003c\/p\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/GouHcOqdt1c?si=yhZWAP7MiqYVKa-y\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e","brand":"Reptilia","offers":[{"title":"Black","offer_id":51826239111507,"sku":"78540","price":179.99,"currency_code":"EUR","in_stock":true},{"title":"Brown","offer_id":51826239144275,"sku":"78541","price":179.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/1952\/9555\/files\/reptilia_recce_carbine_stock_ar_15-065fc4d10c3007.jpg?v=1757261816"},{"product_id":"reptilia-socket-m-lok-qd-sling-mount","title":"Reptilia Socket M-LOK QD Sling Mount","description":"\u003cp\u003eThe Reptilia Socket is a minimalist and streamlined QD sling mount with M-LOK attachment. Available in black and FDE colors.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSling mounting direction is rearward\u003c\/li\u003e\n\u003cli\u003eStreamlined design\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cp\u003eThe Reptilia Socket is attached to an M-LOK rail with a single M-LOK screw and a tab. Therefore, the Socket occupies the space of one M-LOK slot (the Socket can also be attached between two M-LOK slots). It accommodates standard QD sling attachments.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMachined from 7075-T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eMIL-STD Type III Class 2 hardcoat anodized\u003c\/li\u003e\n\u003cli\u003eM-LOK attachment\u003c\/li\u003e\n\u003cli\u003eWeighs 12 g \/ 0.4 oz.\u003c\/li\u003e\n\u003cli\u003eNSN: 1005-01-693-6983\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLike all Reptilia products, the Socket is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.\u003c\/p\u003e","brand":"Reptilia","offers":[{"title":"Black","offer_id":51826240291155,"sku":"78537","price":49.99,"currency_code":"EUR","in_stock":false},{"title":"Brown","offer_id":51826240323923,"sku":"78538","price":49.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/1952\/9555\/files\/reptilia_socket_m_lok_qd_sling_mount-065fc4bb5bfa38.jpg?v=1757261820"},{"product_id":"reptilia-rof-90-mount-30-mm","title":"Reptilia ROF-90 Mount, 30 mm","description":"\u003cp\u003eThis is the best way to mount a red dot sight on your Reptilia AUS Mount at twelve o'clock position! It's compatible with Aimpoint Micros and other optics that use the same footprint – check the list for examples. This mounting piece also fits the Geissele Super Precision scope mount.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSimple and solid construction\u003c\/li\u003e\n\u003cli\u003eLow profile and sight line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eThis is compatible with \u003ca href=\"\/en\/product\/reptilia-aus-mount-30-mm\/78895\"\u003e30mm Reptilia AUS\u003c\/a\u003e and Geissele Super Precision mounts, replacing the top cap of the forward scope ring.\u003c\/b\u003e Available in two colors: black and FDE.\u003c\/p\u003e\u003ch2\u003eWhy a Secondary Sight?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn tactical real-world situations as well as sport shooting and hunting, you may need to shoot accurately both at a distance and quickly at close range – for this purpose, a quick-use red dot sight is installed on the firearm in addition to a magnifying optic\u003c\/li\u003e\n\u003cli\u003eA secondary sight allows you to keep a low-power variable optic (LPVO) pre-set to a higher magnification, speeding up transitions between close and distant targets\u003c\/li\u003e\n\u003cli\u003eAnother use is, for example, to zero subsonic .300BLK rounds for the red dot and supersonic rounds for the magnifying optic (or vice versa)\u003c\/li\u003e \u003cli\u003eSnipers and designated marksmen often have a secondary sight alongside a larger optic, especially in semi-automatic rifles\u003c\/li\u003e\n\u003cli\u003eA red dot sight or such will also enable you to aim with your scoped rifle while using NVGs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cp\u003eSome prefer to keep the secondary sight on the side of the weapon, tilting the rifle to bring the sight picture into view – others prefer to mount the sight at twelve o'clock, aiming over the magnifying optic without tilting the rifle. This mount represents the latter style.\u003c\/p\u003e\u003cp\u003eThe Reptilia ROF-90 replaces the forward top ring cap on your AUS\/Geissele mount. It uses the existing screws of the optic mount's forward scope ring (T15 Torx). The ROF-90 is machined from a single piece of 7075-T6 aluminum and is finished with MIL-STD Type III Class 2 hard anodizing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMachined from 7075-T6 aluminum\u003c\/li\u003e\n\u003cli\u003eMIL-STD Type III Class 2 hardcoat anodized\u003c\/li\u003e\n\u003cli\u003eWeighs 25 g \/ 0.9 oz. (replaces the top ring cap of the scope mount)\u003c\/li\u003e\n\u003cli\u003eCompatible with 30mm Reptilia AUS and Geissele Super Precision optic mounts\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf you prefer your secondary sight to be mounted at a 45-degree angle, check out the \u003ca href=\"\/en\/product\/reptilia-rof-45-mount-30-mm\/78899\"\u003eReptilia ROF-45\u003c\/a\u003e (for Trijicon RMR\/SRO footprint).\u003c\/p\u003e\u003cp\u003eLike all Reptilia products, the ROF mounts are made in the USA and come with a lifetime warranty against workmanship and material defects.\u003c\/p\u003e","brand":"Reptilia","offers":[{"title":"Black","offer_id":51828407238995,"sku":"78528","price":124.99,"currency_code":"EUR","in_stock":true},{"title":"Brown","offer_id":51828407271763,"sku":"78529","price":124.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/1952\/9555\/files\/reptilia_rof_90_mount_30_mm-065fd744061984.jpg?v=1757295117"}],"url":"https:\/\/varusteleka.com\/en-pl\/collections\/reptilia.oembed","provider":"Varusteleka","version":"1.0","type":"link"}